How to change your network connection settings?

Overview

Under certain circumstances it will be necessary to change the settings your generator uses to connect to your home network.  If you change your wireless password, get a new router, or a new internet service provider this article will walk you through the steps for reconnecting your generator to your home network.

Locate the generator control panel. Home standby generator control panels are located under the generator lid on the right side. Push the OFF button once.
Press ESCAPE to access the top level options menu.
Press the UP button until WIFI is flashing.
Press ENTER  to access WIFI settings.
Press the Up button until Redo WIFI Setup is displayed and then press ENTER. A question mark will appear after Yes.
Press ENTER again to begin the process of updating your generator's network settings.
Your generator will indicate that it is resetting the wireless adapter. When it is ready to accept an incoming connection from a mobile device the control panel will prompt you to "Setup WiFi Now".
Continue With: How to use the Mobile Link Setup App?

Thank you again for your business and being a valued member of the Mobile Link Family.